QX60 ABS ITB19-037 REALL . R1917 INSPEC T ABS LIG HT OFF CONDITION . REPLACE ABS CTUA TO

ABS LIHGT ON RETRIEED CODE FOR STOP LAMP SWITCH C1116 . STOP SWITCH REPLACED IN PAST. CONTCATED TSM ICK SHCWARTZ WHO WAS INVOLVED WITH LAST REPAIR, RETRIEVED DAG INFORMATION AND SET HIM COPIES OF DIAG FINDINGS. WAS DRIECTED TO INSPECT THE ADJUSTMENT OF THE RBAKE SWITHC IN RGEARD TO THE BAKE PEDDLE BRACKET. CLEAANCE SHOULD BE .029-0.077. COMPARED TO THREE OTHER NEW VEHICLES AND SET CLEAARNCE TO MIDDLE ARNGE APPROX .050". CLEARED DTC REEST BRAKE WSITCH ADJUSTMENT AND RECLEARED DTC . STREETS TEST VEHICLE AND VEHICLE CODE WOULD NEVER RESET. CAR RETURNED TO CUSTOE RAND FINDINGS SENT TO FACTORY TSM ... DIAGNOSIS: ANTI SKID

cust states thre abs light is on hceck and report LOCATE abs light on used consult3 to performed diagnosis found c1116 stop lamp switch tes switch found at time get no respond from switch check and adjust switch did same thing intenral afilure needed to EXCHANGED and set switch test drove and reset light. DIAGNOSIS: ABS

CUTOMER STATED ABS LIGT EMINATING ON INSPECT AND ADISE CSTOMER STATED THAT GETTING ABS LIGHT IS EMINATING ON. PERFORM ALL SYST. SCANNED FOUND CODE C1116 STORED AS PAST. C1116: CEASED LAMP SWITCH. TESTED STOP LAMP SWITCH AND CIRCUIT DETECT BOTH TO BE IN GOOD WORKING CONDITION. WILE ESTING THE SIWTCH FOUDN THAT THE SWITCH AS SLIGHTLY OUT OF ADJUSTMENT. REC. ADJUSTING STOP LAMP SWITCH AS THE FIRST STEP TOWARDS REPAIR. ADJUSTED BOTH STP LAMP SWITCES , CLEARED CODE AND ROAD TESTED. FATER SEERAL ROAD TESTS THE COE HAS NOT RETURNED, NO FURTHER DIAG REQUIRED AT THIS TIME.. BRK.

CHECK WITH CONSULT FOR DTCS C/S ABS IGHT APPEARS PERIODICLALY, LIGT IS NOT CURRENTLY PRESENT C1116 CODE STOP LAMP SW STORED IN ABS YSSTEM DUE TO INTERNAL STOP LAMP SWITCH FI.REPLACED AND ADJUST THE STOP LAMP SWITCH TO RESOLVE A INCIDENT. BRAKES